Yorkville NX10C

Yorkville NX10C



  • No need to bring separate stands for stage lighting and speakers when NX10C's can be mounted under the light bars, saving valuable stage space.
  • For side-wash monitor applications on tight stages, the NX10C can be mounted under the front of house cabinets to provide a monitor signal that will be fully phase coherent with the front of house signal.
  • The innovative custom rear mounted handle also functions as a tilt stand allowing the NX10C to be used as a compact wide coverage floor monitor or center fill cabinet.
  • Versatile inputs for mic or line level sources as well as an 1/8th-inch TRS jack allow the NX10C to direct connect to any audio source.


Active or Passive Active Program Power (Watts) 300 Watts (600 Watts Peak) Biampable Self Powered Max SPL (dB) 125dB Peak (122dB Continuous) Frequency Response (Hz +/- 3dB) 80Hz - 20kHz Crossover Frequency (Hz) 2500Hz Driver Configuration Coaxial 10-inch/1-inch HF Driver(s) 1-inch Throat, Ceramic Magnet, 1.4 inch PETP Film HF Dispersion (°H x °V) 60 x 60 LF Driver(s) 10- inch Ceramic Magnet with a 2.5" voice coil HF Amplifier Type Class A/B LF Amplifier Type Two Tier Class- H Power Cable Yes Power Switch Yes Power Consumption (typ/max) 100-240V, 12-5A, 1200W Inputs 3 (Combi-jack Mic Input / Combi-jack Line Input / 1/8-inch TRS Line Input) 1/4" inputs are parallel Input Sensitivity (Vrms Sine) 1.23 Vrms, +4dBu Mixer Controls Contour (Playback/Vocal Mode) Level Controls Line/Mic Limiter Yes LED Indicators Power, Clip Feet Yes Pole Mount Adapter (1 3/8"-3.5cm) Pole Through Enclosure Materials Injection Molded Fiber