Yamaha DBR12

Yamaha DBR12


DBR Series speakers have two input channels. CH1 has a combo jack which accepts both XLR and TRS Phone allowing for either Mic or Line level input signals. CH2 offers two input options; a combo jack that accepts XLR or TRS Phone, and an RCA pin jack for input from CD players or other stereo line-level sources. The onboard mixer allows you to select either CH1+2 MIX to mix the signal of CH1 and CH2, or CH1 THRU to pass the signal from CH1 only. Rigging Points for Installation Applications. DBR loudspeakers come equipped with M8 rigging threads, allowing for rigged applications with optional speaker brackets or standardized eye-bolts.*Speaker brackets and eye-bolts are not included.

General Specifications:

  • Speaker Type: 2-way, Bi-amp powered speaker, Bass-reflex type
  • Frequency Range (-10dB): 52Hz - 20kHz

Nominal Coverage: 

  • 90 degrees H, 60 degrees V


  • LF - Diameter: 12" cone, Voice Coil:2", Magnet:Ferrite
  • HF - Diaphragm: 1.4", Type: 1" throat compression driver, Magnet:Ferrite


  • 2.1kHz: FIR-X tuning (linear phase FIR filter)

Output Power: 

  • Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)

Max. Ouput level: 

  • 131dB SPL

I/O connectors: 

  • INPUT1: Combo x1
  • INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced)
  • OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)



Heat Dissipation: 

  • Fan cooling, 4 speeds

Power Requirements: 

  • 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz

Power consumption: 

  • 74W(1/8 Power Consumption), 18W(Idle)


  • Side x 2

Flying and Mounting Hardware: 

  • Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)

Pole Socket:

  • 35mm (Bottom x 1)

Dimensions (W X H X D): 

  • 376mm (14.8") X 601mm (23.7") X 348mm (13.7")

Net weight: 

  • 15.8 kg (34.8 lbs)