• KV2 Audio EX2.2 - Active Bass Module


    EX2.2 - Active Bass Module

    The EX2.2 is a double 12", compact, active subwoofer system. On- board electronics include a stereo crossover with high pass outputs and full overdrive protection. Featuring KV2 Audio’s switching amplifier technology, precision manufactured woofer designs and a high efficiency, twin chamber acoustic design, the EX2.2 delivers tight, fast, controlled bass response at very high output levels from a small cabinet footprint.


        Professional, Baltic birch construction with wear resistant polymer coating
        130dB sustained output, 133dB peak
        1000W high efficiency, current-enhancing, switching, low frequency amplifier
        Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls
        Excellent reproduction of bass frequencies with high transient content at high output levels
        Stereo or Mono inputs with through signal outputs and 120Hz High Pass outputs
        Two 12" high output, low frequency drivers with 3" (75 mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures
        Two recessed side handles for simplified handling and carrying
        Acetyl copolymer, high impact, low friction feet are located on two sides allowing lock-in and easy cabinet movement
        Two internal corner braces with four M10 suspension points
        M20 top hat for pole mounting applications
        LED indicators for signal present, limiter, thermal condition and power ON status

    System Acoustic Performance
    Max SPL Long-term    130dB
    Max SPL Peak    133dB
    -3dB Response    45Hz to 125Hz
    -10dB Response    40Hz to 125Hz
    Crossover Point    125Hz
    Low Frequency Section
    Acoustic Design    Twin Asymmetrical loading
    Number of Drivers    2
    Woofer Size / Voice Coil Diameter / Design    12" / 3" / Inside outside
    Diaphragm Material    Epoxy Reinforced Cellulose
    Magnet Type    Neodymium
    Low Frequency Amplifier Specification
    Type    High efficiency, Current-enhancing switch mode
    Rated Continuous Power    1000W
    Distortion    <0.05%
    Operating Bandwidth    40Hz to 125Hz
    Signal Input
    Input Channels    2
    Input Sensitivity    1.0V RMS
    Input Impedance    20kΩ (balanced)
    Signal Output
    Signal Output Channels    Mid/High, Through
    Level Control    -6 - +6dB
    Phase    0° / 180°
    RMS Limiter    YES
    Power Requirements
    Power Connector    Neutrik PowerCon®
    Operating Voltage    115V / 230V / 250V
    Operating Voltage Range    100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
    Recommended Amperage    10A 115V | 5A 230V | 5A 250V
    Cooling    Passive
    Cabinet Material    Baltic birch
    Handles    2
    Pole Mount    M20
    Color    "Orange peeled" Matt Black or any RAL
    Physical Dimensions
    Height    491 mm (19.33")
    Width    594 mm (23.38")
    Depth    616 mm (24.25")
    Weight    49 kg (107.8lbs)