• KV2 Audio EX10 - Active High Resolution Speaker System


    KV2 Audio EX10 - Active High Resolution Speaker System

    The EX10 is a very compact 2-way, high-output, full range active speaker system. Despite its 10" woofer and remarkably small footprint it successfully takes on many larger 12" models and is favored by audio visual and rental companies all over the world for its sheer quality and tremendous output. On-board electronics ensure fast, easy set up and complete control with electronic crossovers, phase alignment, equalization and speaker protection integrated into the EX10’s amplifier module


    • Professional, Baltic birch construction with wear resistant polymer coating
    • 126dB sustained output, 129dB peak with very high dynamic range and low noise floor
    • 500W of total power with complete on-board speaker management system
    • 450W high efficiency, current enhancing, switching low frequency amplifier
    • Very high quality 50W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output
    • Compact, asymmetrical, trapezoidal cabinet design allows for use in stage monitor or under balcony applications with high pass filter to adjust equalization and phase response
    • Wide dispersion, 100° H x 80° V rotatable horn
    • 1.75" (44 mm) Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnet structure
    • 10" woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity
    • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, OmniMountTM bracket point and four M6 bracket points
    • Four additional M10 suspension points for flexible rigging and installation options
    • Top hat for pole mounting applications
    • LED indicators for signal present, limiter, thermal condition and power ON status

    System Acoustic Performance
    Max SPL Long-term    126dB
    Max SPL Peak    129dB
    -3dB Response    65Hz to 20kHz
    -10dB Response    55Hz to 28kHz
    Crossover Point    1.6kHz
    High Frequency Section
    Acoustic Design    Horn Loaded
    High Horn Coverage Horizontal / Vertical    100° x 80°
    Rotatable Horn    YES
    Throat Exit Diameter / Diaphragm Size    1" / 1.75"
    Diaphragm Material    Titanium
    Magnet Type    Neodymium
    High Frequency Amplifier Specification
    Type    Class AB Push-Pull
    Rated Continuous Power    50W
    Distortion    <0.05%
    Operating Bandwidth    1.6kHz to 28kHz
    Low Frequency Section
    Acoustic Design    Front Loaded, Bass Reflex
    Woofer Size / Voice Coil Diameter / Design    10" / 2.5" / Trans Coil
    Diaphragm Material    Epoxy Reinforced Cellulose
    Magnet Type    Neodymium
    Low Frequency Amplifier Specification
    Type    High efficiency, Current-enhancing switch mode
    Rated Continuous Power    450W
    Distortion    <0.05%
    Operating Bandwidth    55Hz to 1.6kHz
    Signal Input
    Input Sensitivity    0.775V RMS
    Input Impedance    20 kΩ
    Power Requirements
    Power Connector    Neutrik PowerCon®
    Operating Voltage Range    100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
    Recommended Amperage    6A 115V | 3A 230V | 3A 250V
    Cabinet Material    Baltic birch
    Handles    1
    Pole Mount    3 5mm
    Color    "Orange peeled" Matt Black or any RAL
    Physical Dimensions
    Height    514 mm (20.23")
    Width    310 mm (12.20")
    Depth    326 mm (12.83")
    Weight    22 kg (48.4lbs)