FC10S Active 10'' Studio Subwoofer
C$399.00
FC10S is designed for any mid-to-large room requiring bass extension, the Fluid Audio FC10S active subwoofer is the perfect solution for recording studios, gaming rigs, home theatersany application that would require solid and accurate bass reproduction.
Many types of music benefit from bass extension from Hip-Hop, to House, to Rock. Being able to hear your mix with bass extension is critical to accurately creating your music. The FC10S subwoofer allows you to hear every detail down to 20Hz, which gets below your hearing threshold, and down to where you actually "feel" it.
Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why Fluid Audio included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.
The FC10S also has two built-in EQ settings that allow for two different settings depending on your music: A more conventional Flat response, as well as a "Punch" setting that is perfect for Dance or other mid-bass heavy music.
For further flexibility, the FC10S has a variable phase adjustment to fine tune the phase for optimal matching to your L/R monitors (0-180°), a variable low pass crossover filter control (50-200Hz) and a 80Hz high pass filter (used with foot switch) for satellite connections. Fluid Audio has also included a ground lift switch as well, to minimize ground hum with some home wiring. Front firing bass-reflex port on front baffle for ease of placement.
- Amplifier type: Class D
- Power Output (Continous): 200 watts
- Frequency response: Frequency response: 20-200Hz
- Max SPL: Max SPL 107dB Flat / 108dB Punchy setting
- I/O Rear panel: XLR balanced and 1/4" balanced/unbalanced inputs, RCA inputs, XLR balanced and 1/4" balanced/unbalanced outputs, Subwoofer bypass pedal input (Included)
- Rear panel adjustments: Input gain, Variable phase, Ground lift switch, Punchy Bass / Flat
- Variable lowpass filter control: 50Hz-200Hz
- Variable Phase control: 0 180°
- Power Saving: Amplifier standby function to conserve energy
- Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse
- Mains Voltage Input: Factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
- Size: 15.25" x 12.5" x 15.5", 387 x 317 x 394mm
- Weight: 28.2 lbs / 12.8 kg
- Cabinet: Vinyl-laminated, high acoustic efficient MDF
Many types of music benefit from bass extension from Hip-Hop, to House, to Rock. Being able to hear your mix with bass extension is critical to accurately creating your music. The FC10S subwoofer allows you to hear every detail down to 20Hz, which gets below your hearing threshold, and down to where you actually "feel" it.
Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why Fluid Audio included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.
The FC10S also has two built-in EQ settings that allow for two different settings depending on your music: A more conventional Flat response, as well as a "Punch" setting that is perfect for Dance or other mid-bass heavy music.
For further flexibility, the FC10S has a variable phase adjustment to fine tune the phase for optimal matching to your L/R monitors (0-180°), a variable low pass crossover filter control (50-200Hz) and a 80Hz high pass filter (used with foot switch) for satellite connections. Fluid Audio has also included a ground lift switch as well, to minimize ground hum with some home wiring. Front firing bass-reflex port on front baffle for ease of placement.
Specifications
- Woofer: 10-inch composite paper cone with high temperature voice coil and damped rubber surround- Amplifier type: Class D
- Power Output (Continous): 200 watts
- Frequency response: Frequency response: 20-200Hz
- Max SPL: Max SPL 107dB Flat / 108dB Punchy setting
- I/O Rear panel: XLR balanced and 1/4" balanced/unbalanced inputs, RCA inputs, XLR balanced and 1/4" balanced/unbalanced outputs, Subwoofer bypass pedal input (Included)
- Rear panel adjustments: Input gain, Variable phase, Ground lift switch, Punchy Bass / Flat
- Variable lowpass filter control: 50Hz-200Hz
- Variable Phase control: 0 180°
- Power Saving: Amplifier standby function to conserve energy
- Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse
- Mains Voltage Input: Factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
- Size: 15.25" x 12.5" x 15.5", 387 x 317 x 394mm
- Weight: 28.2 lbs / 12.8 kg
- Cabinet: Vinyl-laminated, high acoustic efficient MDF