Adam Audio A4V - Nearfield Monitor, 2-way, 7" woofer

QUALITY COMPACTED

The A4V is a two-way speaker incorporating a 4-inch long-throw woofer made from the same Multi-Layer Mineral (MLM) fibers as other A Series speakers plus the classic X-ART tweeter. Onboard DSP-based tuning capabilities let you easily dial in the perfect sound for your space.

With a frequency range of 52 Hz to 45 kHz, the A4V can accommodate a broad spectrum of audio applications—from producing podcasts to mixing string quartets—and will fit well within immersive and 3D setups.

Technical Data

View the specifications of the ADAM Audio A4V by clicking each drop-down section.

• General Data

• Display: Front panel multi-color LED

• Cabinet Design: Dual front ported

• Cabinet Material: Vinyl wrapped MDF and painted MDF front panel

• Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8)

• Power consumption (max, idle, sleep): 220 W, 10 W, 3.5 W

• AC Input Voltage: 100 – 240 V, 50/60 Hz

• Power Rating: 300 W max.

• Operating Conditions: -10° C to +45° C (+14° F to +113° F); <75 % RH, non-condensing

• Weight: 5.8 kg (12 lbs 13 oz)

• Dimensions (Height x Width x Depth): 268 mm x 158 mm x 220 mm (10 1/2″ x 6 1/4″ x 8 5/8“)

• Warranty: 5 years (2 years warranty plus 3 years optional with product registration)

• Delivery Contents: A4V loudspeaker, power cable, Quick Start Guide

• Audio Input Connectors

• Analog: XLR, RCA

• Input Impedance: 9 kOhm / 3.3 kOhm

• Max. Input Level: +19 dBu

• Amplification

• Woofer

  • Amplifier Type: PWM

  • Peak (10% THD, limiter deactivated): 110 W

  • RMS (1% THD, limiter deactivated): 90 W

• Tweeter

  • Amplifier Type: Class A/B

  • Peak (10% THD, limiter deactivated): 20 W

  • RMS (1% THD, limiter deactivated): 15 W

• Control Options [via Network]

  • Networking Connector: RJ45

  • Connection Type: Ethernet

  • Communication Protocol: OCA using standard IP data

  • Control Software: A Control (Windows and MacOS available)

  • Room Adaption Options: Backplate, Extended, Sonarworks SoundID Reference integration

  • Advanced Room Adaptation: 6 x PEQ, Level, Delay

  • Third-party Calibration Compatibility: Import from Sonarworks SoundID Reference

• Acoustics

• Frequency Response @ -3 dB: 58 Hz – 41 kHz

• Frequency Response @ -6 dB: 52 Hz – 45 kHz

• Maximum SPL per speaker at 1 m: 100 dB SPL

• Crossover Frequencies: 3.0 kHz

• Drivers

• Woofer

  • Basket Diameter: 4″

  • Voice Coil Diameter: 1″ (25 mm)

  • Cone Material: MLM

• Tweeter

  • Type: X-ART

  • Diaphragm Area: 4 inch² (2420 mm²)

  • Equivalent Diaphragm Diameter: 2″ (56 mm)

  • Velocity Transform Ratio: 4 to 1

  • Diaphragm Weight: 0.17 g

  • Waveguide: HPS (rotatable)

  • Waveguide Dispersion: 120° horizontal, 70° vertical

• Signal Processing

• AD converter: 24-bit

• Internal sample rate: 96 kHz

• Delay range, resolution: 0 – 10 ms, 0.1 ms

• Protection: Independent peak and thermo limiters for each driver, and amplifier thermo limiters

• Control Options [via Backplate]

• Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting

• Level: -12 dB to +12 dB

• Input Selection: Balanced, unbalanced

• Voicings: Pure, UNR

• Room Adaption:

  • Bass: +2, 0, -2, -4 dB

  • Desk: 0, -2, -4 dB

  • Presence: +1, 0, -1 dB

  • Treble: +1.5, 0, -1.5 dB