Adam Audio A44H Nearfield/Centre Monitor

HIGH STANDARDS, LOW PROFILE

With a 19-inch width, the horizontally oriented A44H can sit on a standard rack shelf or be mounted above or below a display. The completely new design also enables the A44H to serve as a center speaker in immersive and 3D speaker configurations.

Dual 4-inch long-throw woofers and the X-ART tweeter deliver a wide frequency range, while onboard DSP-based tuning capabilities enable you to tweak the sound easily.

Technical Data

General Data

• Display: Front panel multi-colour LED

• Cabinet Design: Dual front ported

• Cabinet Material: Vinyl wrapped MDF and painted MDF front panel

• Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8)

• Power consumption (max, idle, sleep): 220 W, 10 W, 3.5 W

• AC Input Voltage: 100 – 240 V, 50/60 Hz

• Power Rating: 300 W max.

• Operating Conditions: -10° C to +45° C (+14° F to +113° F); <75 % RH, non-condensing

• Weight: 9.7 kg (21 lbs 6 oz)

• Dimensions (Height x Width x Depth): 135 mm x 432 mm x 350 mm (5 3/8″ x 17″ x 13 3/4″)

• Warranty: 5 years (2 years warranty plus 3 years optional with product registration)

• Delivery Contents: A44H loudspeaker, power cable, Quick Start Guide

Audio Input Connectors

• Input Impedance: 9 kOhm / 3.3 kOhm

• Max. Input Level: +19 dBu

• Analog: XLR, RCA

Signal Processing

• AD converter: 24-bit

• Internal sample rate: 96 kHz

• Delay range, resolution: 0 – 10 ms, 0.1 ms

• Protection: Independent peak and thermo limiters for each driver, and amplifier thermo limiters

Amplification

• Woofer

  • Amplifier Type: PWM

  • Peak (10% THD, limiter deactivated): 110 W

  • RMS (1% THD, limiter deactivated): 90 W

• Tweeter

  • Amplifier Type: Class A/B

  • Peak (10% THD, limiter deactivated): 20 W

  • RMS (1% THD, limiter deactivated): 15 W

Control Options [via Network]

• Networking Connector: RJ45

• Connection Type: Ethernet

• Communication Protocol: OCA using standard IP data

• Control Software: A Control (Windows and MacOS available)

• Room Adaption Options: Backplate, Extended, Sonarworks SoundID Reference integration

• Advanced Room Adaptation: 6 x PEQ, Level, Delay

• Third-party Calibration Compatibility: Import from Sonarworks SoundID Reference

Signal Processing

• AD converter: 24-bit

• Internal sample rate: 96 kHz

• Delay range, resolution: 0 – 10 ms, 0.1 ms

• Protection: Independent peak and thermo limiters for each driver, and amplifier thermo limiters

Control Options [via Backplate]

• Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting

• Level: -12 dB to +12 dB

• Input Selection: Balanced, unbalanced

• Voicings: Pure, UNR

• Room Adaption:

  • Bass: +2, 0, -2, -4 dB

  • Desk: 0, -2, -4 dB

  • Presence: +1, 0, -1 dB

  • Treble: +1.5, 0, -1.5 dB